300 Win 38-55 brass, 100 are new and 200 fired 1X and cleaned. 2.075 std lenth. SPF
***********faster reponse using my email jimc@castingstuff.com
brass, new items listed
brass, new items listed
Last edited by 5 on gussy, edited 0 times in total.
Re: 45-70 roller and 38-55 brass, more to be listed
New items:
I have a Kelly soule base that fits Rem pattern no screws or spring, $50.00
I have a few heavy sprue plates for Lyman, large block, single cavity moulds. Also some wrenches for lever guns to remove the screw in mag plug so it can be cleaned. Only for the slotted, screw in type plugs. $15.00 for either

I have two 100 yr old pocket watches:
One high grade silver cased with gold plate front and back bezels, Swiss made with neat brass chain and protective case. It runs fine but I would recomend having it oiled as I do not know how long its been since it was $135.00

One american made brass hunter case with chain. This is a lever set type. Serviced recently and ready to run. $145.00

I have a very nice 12 ga MEC Sizemaster 77 loader. This has the collet brass resizer and auto primer feed. The bottles (not shown, but included) have yellowed from sunlight, it comes with a 1 1/8 oz bar and #28 bushing. $120 plus shipping


I have a Kelly soule base that fits Rem pattern no screws or spring, $50.00
I have a few heavy sprue plates for Lyman, large block, single cavity moulds. Also some wrenches for lever guns to remove the screw in mag plug so it can be cleaned. Only for the slotted, screw in type plugs. $15.00 for either

I have two 100 yr old pocket watches:
One high grade silver cased with gold plate front and back bezels, Swiss made with neat brass chain and protective case. It runs fine but I would recomend having it oiled as I do not know how long its been since it was $135.00

One american made brass hunter case with chain. This is a lever set type. Serviced recently and ready to run. $145.00

I have a very nice 12 ga MEC Sizemaster 77 loader. This has the collet brass resizer and auto primer feed. The bottles (not shown, but included) have yellowed from sunlight, it comes with a 1 1/8 oz bar and #28 bushing. $120 plus shipping


Last edited by 2 on gussy, edited 0 times in total.
Re: 45-70 roller and brass, new items listed
Trades?? I am in need of a sight for a Shiloh, long range, extra windage.
Re: 45-70 roller and brass, new items listed
Gussy
Got an MVA long range #100 for a sharps with an MVA Hadley eyecup. $425.00
Got an MVA long range #100 for a sharps with an MVA Hadley eyecup. $425.00
Re: 45-70 roller and brass, new items listed
shooter37 wroteCOLONGussy
Got an MVA long range #100 for a sharps with an MVA Hadley eyecup. $425.00
Interested in any kind of trade??
Gus
I may be slow responding, I'm going fishing for about 10 days.
Re: 45-70 roller and brass, new items listed
The roller is sold.
Gus
Gus
Re: brass, new items listed
38-55 brass is sold.
Offers on items/trades ??
Still have the 12 ga MEC sizemaster and other items.
I will be adding a couple of things soon.
Offers on items/trades ??
Still have the 12 ga MEC sizemaster and other items.
I will be adding a couple of things soon.