WTB .408 or .458 full octagon barrel

This is the area to post your classified items. Please maintain your own ads - removing them when necessary.
coppertop
PostsCOLON 4
JoinedCOLON Thu May 13, 2010 1:13 pm

WTB .408 or .458 full octagon barrel

Post by coppertop » Tue Sep 14, 2010 9:27 am

I am still looking for a good used full octagon barrel to put on an old rolling block. I want either a 45-70 or a 40-65. Thanks.

Hiwall
PostsCOLON 66
JoinedCOLON Sun Nov 20, 2005 2:46 pm
LocationCOLON Central California

Re: WTB .408 or .458 full octagon barrel

Post by Hiwall » Tue Sep 14, 2010 10:14 am

I have a very good 32 inch barrel available. It is currently set up for a hiwall action and would need to be rechamber etc. for a roller. Not cheep but very nice. If interested reply directly.
tom

Hiwall7@gmail.com

DRCook
PostsCOLON 472
JoinedCOLON Sun Nov 27, 2005 3:25 pm

Re: WTB .408 or .458 full octagon barrel

Post by DRCook » Tue Sep 14, 2010 12:44 pm

If you could manage a half round, I have a .458 Badger that is half oct, half taper round that had a bad chamber. It is currently set up for a Stevens 44 1/2 and would need the 1 1/2 - 2 in shank turned off and refit. It would finish at 28". it is already blued, has the front dovetail cut of course. It is a CPA nbr 4 profile.
drcook = david r, not dr. but thanks for the compliment :)

Barry Miller
PostsCOLON 39
JoinedCOLON Fri Jan 30, 2009 11:12 am
CONTACTCOLON

Re: WTB .408 or .458 full octagon barrel

Post by Barry Miller » Thu Sep 16, 2010 7:43 am

Coppertop,
I have a 45-70 and 40-70 Shiloh barrels if you are interested. Both 34" long, full octagon. Your choice $175.00. I will pay the shipping lower 48 states. E-mail me at huguninls@yahoo.com have a great day. Barry Miller.

Barrels are Sold. Thanks for looking. Barry.

BUTTON_POST_REPLY