NEI Mould

Discussion on Bullets and Bullet Lubes, Casting, Swaging, Paper Patching, and Lube Cookies.
chaz
PostsCOLON 55
JoinedCOLON Sun Nov 20, 2005 6:36 pm
LocationCOLON Erie, Pa.

NEI Mould

Post by chaz » Sun Oct 30, 2016 2:49 pm

Just found an NEI two cavity mold in my stuff marked .375- 380 can't think of where I got it from but I may just try it in my 38-50, I'm thinking the larger cavity is 380 grain. Don't know how to post pics on sight

Chaz

Arnie
PostsCOLON 321
JoinedCOLON Sun Nov 20, 2005 6:25 pm
LocationCOLON Lodi,Ca.

Re: NEI Mould

Post by Arnie » Sun Oct 30, 2016 7:50 pm

or one cavity is .375 and the other .380

chaz
PostsCOLON 55
JoinedCOLON Sun Nov 20, 2005 6:36 pm
LocationCOLON Erie, Pa.

Re: NEI Mould

Post by chaz » Sun Oct 30, 2016 8:38 pm

I thought that at first but they seem to be the same diameter with my verniers, The lengths are considerably different though.

Plainbase
PostsCOLON 120
JoinedCOLON Thu Nov 24, 2005 11:26 am
LocationCOLON Out West

Re: NEI Mould

Post by Plainbase » Mon Oct 31, 2016 1:20 pm

NEI lists 2 .375-380 bullets. One is a nice looking Gunn and the other one is "different". Depending on what barrel you have on your Hepburn these may be either too small in diameter for your grooves or too heavy for your twist. Tell us about your barrel.
Plainbase

chaz
PostsCOLON 55
JoinedCOLON Sun Nov 20, 2005 6:36 pm
LocationCOLON Erie, Pa.

Re: NEI Mould

Post by chaz » Mon Oct 31, 2016 6:25 pm

I won't have it in hand until this weekend. It is a DZ arms, used. I believe they use green mountain barrels but I do not know the twist. I will post twist when i pick it up. Unless someone knows there standard twist.

Chaz

BUTTON_POST_REPLY