Here's the place to share your questions, knowledge, and experience about the shooting techniques that could make us all better shooters. Safety must always be a consideration when using black powder in our rifles.
6 posts • Page 1 of 1
Finally to it to the range today and sighted in at 25 yds. It makes a ragged hole at that distance. Moved to 100 yds and only got one round off when the trigger broke. It won't hold on full cock. I bought this NIB and wasn't expecting this. I guess this is where I get to learn about the innards of a highwall.
- PostsCOLON 1593
- JoinedCOLON Sun Nov 20, 2005 9:12 pm
- LocationCOLON the most boring real estate west of Illinois
Becareful. that is NOT the type of highwall/lowwall to learn on. It is not like the originals. Get some advice before proceeding. First hand help would be better.
I'm not from here, I just live here.
Thanks for the caution, Brent. I think I've discovered the problem. The trigger is adjustable and it was apparently set at its most sensitive point by the factory. I adjusted it and the problem seems to have disappeared. I'll keep my eye on it but I think it will be o.k. Like you, I shoot pp bullets. I seat mine about .140" ahead of the end of the case in the 1885. My beginning load has been a veggie wad over about 80 grains of 1½ Swiss slightly compressed behind a 500 gr. swaged lead bullet. Unfortunately, I wasn't able to see what it will do at 100 yds. but might still get a chance this weekend.
You can send the trigger & sear off to Lee Shaver and for $35 he will make it a great ~2 pound trigger. Did so with mine and it is excellent. Very accurate rifles. You will be just as pleased at 100 (200, 300, 385, 500 & 600) once you develop the loads for same.