CSA 1885 set trig

Post your projects and questions here.
march1941
PostsCOLON 26
JoinedCOLON Sun Oct 14, 2012 1:02 pm
LocationCOLON Reading,PA

CSA 1885 set trig

Post by march1941 » Fri Aug 26, 2016 7:02 pm

I would like to increase set pull from 5oz to 16oz area.Can this be done with spring change?The std pull is 2lb 8oz and very clean.Thanks for any info on this.Its a coil spring action.Bob. :roll:

Arnie
PostsCOLON 319
JoinedCOLON Sun Nov 20, 2005 6:25 pm
LocationCOLON Lodi,Ca.

Re: CSA 1885 set trig

Post by Arnie » Fri Aug 26, 2016 7:13 pm

There should be a small screw in the back of the trigger or the trigger plate to adjust let off .

march1941
PostsCOLON 26
JoinedCOLON Sun Oct 14, 2012 1:02 pm
LocationCOLON Reading,PA

Re: CSA 1885 set trig

Post by march1941 » Fri Aug 26, 2016 7:50 pm

Arnie the allen screw does not change set pull.If turned in to drop hammer and backed out 1/2 turn its 5.5 oz 2turns it stays the same.Bob. :roll:

Brent
PostsCOLON 1593
JoinedCOLON Sun Nov 20, 2005 9:12 pm
LocationCOLON the most boring real estate west of Illinois

Re: CSA 1885 set trig

Post by Brent » Sat Aug 27, 2016 5:06 am

I believe the answer is yes. But I am not a gunsmith, I just play one on the internet. The best answer will come from giving CSA a call asking them.

I should add, I think increasing the strength of the trigger return spring is what you need to do.
I'm not from here, I just live here.

User avatar
Ranch 13
PostsCOLON 1569
JoinedCOLON Mon Nov 21, 2005 9:41 am
LocationCOLON Eastern Wy
CONTACTCOLON

Re: CSA 1885 set trig

Post by Ranch 13 » Mon Aug 29, 2016 3:37 pm

Best bet is to call CSA and talk to Pat. He'll walk you thru any adjustment that can be done on that.

BUTTON_POST_REPLY