Husqvarna Model 33 Roller conversion

Post your projects and questions here.

Husqvarna Model 33 Roller conversion

Postby Ken » Sat Dec 29, 2007 5:06 pm

I have a Husqvarna Model 33 rollingblock. The bore is gone but otherwise a nice rifle and what appears to be 9.3x57Rx360. Been thinking of either rebarreling or relining to 30-30 for use as a light weight hunting rifle. Anyone have any experience with these actions? Will it hold the 30-30 or have I passed the limits its strength?
Ken
 
Posts: 15
Joined: Fri Nov 25, 2005 6:42 pm

Postby Yellowhouse » Mon May 05, 2008 11:02 am

I like to know about these actions myself so back up to top.
Yellowhouse
 
Posts: 98
Joined: Tue Dec 18, 2007 8:49 am
Location: Oklahoma

Postby 40-65tom » Mon May 05, 2008 12:53 pm

I have a model 33 in 9.3x57r/360. I love this rifle for its small rounded receiver and full length stock. It also shoots very well. I would consider the 30-30 a bit much unless loaded with cast bullets and light chargers.

Look at this site for a little history and other calibers: http://www.skydevaaben.com/index.xml

Tom
40-65tom
 
Posts: 30
Joined: Thu Nov 24, 2005 10:58 am

Postby Yellowhouse » Mon May 05, 2008 3:55 pm

Anyone have any info on the #3 action?
Yellowhouse
 
Posts: 98
Joined: Tue Dec 18, 2007 8:49 am
Location: Oklahoma

Postby 40-65tom » Tue May 06, 2008 4:15 pm

Okay, I give up what does a #3 look like. I know a little about most models but not sure what a #3 is. A pic would be helpful.

Tom
40-65tom
 
Posts: 30
Joined: Thu Nov 24, 2005 10:58 am


Return to BPCR Gunsmithing and Other Projects

Who is online

Users browsing this forum: Google [Bot] and 2 guests