My Final Project (at least for now)

DRCook
PostsCOLON 472
JoinedCOLON Sun Nov 27, 2005 3:25 pm

My Final Project (at least for now)

Post by DRCook » Fri Apr 06, 2007 3:48 pm

Well I decided to have 1 more last and final rifle built and yes its another CPA.

Here are the specs

.44 cal (.429 bore so actually a .42 or .43 cal - same bore as a .44 mag or .444 marlin) 1:16 twist Douglas barrel. I am still debating as to a nbr 4 or nbr 5 profile, 32" long

I ordered a reamer to build this on a 45 2.6 case, Dave Manson named it the 44-95 for me so....

Steve Brooks is going to build me a Creedmore bullet mold and is going to help me with the particulars

Kelley O. Roos
PostsCOLON 944
JoinedCOLON Sun Nov 20, 2005 6:55 pm

Post by Kelley O. Roos » Fri Apr 06, 2007 6:24 pm

DRCook,

You'll have a bottle 44. Actually you'll have a 100 as the 44-100 is 2.6 long.

I just finished my High-Wall 44-100 and will be testing it tomorrow. Thing is long and holds 89G. of 3F. Swiss with .030 compression, that is just the wad diameter for compression.

Kelley O.

DRCook
PostsCOLON 472
JoinedCOLON Sun Nov 27, 2005 3:25 pm

Post by DRCook » Sat Apr 07, 2007 6:28 pm

Kelley,

I am having the reamer ground using the same geometry conceptually as Dave Crossno (spelling?) did with the 40-82 and of course the 40-65 has, ie: a taper down and then straight, so I shouldn't be ending up with a bottleneck, if you have a fax, I would be glad to share the print with you.

Anyway, I'm thinking this might work out well, and yes I had heard via the grapevine (Kenny W to be precise) that you were working up a 44.

Steve Brooks told me that he had built a 429 on a 45-70 case a few years ago and it worked well for him

have a good day!
dave c.

BUTTON_POST_REPLY